Standing Seam Roof (SSR)

(Revised: 09/25/20)

Panel Profiles:

Standing Seam (SSR) 24" Wide 24 & 22 Gage

Product Description Notes:

Roof Secondary must be 8 ½”, 10”, 11 ½” Purlins, WideBay, Bar Joists
7" Purlins are not available

Roof Pitches fully supported by VPCommand = 1/4:12 - 4:12

Maximum Roof Slope Length w/o Stepped Joint w/ Fixed Eave = 220'-0"

Maximum Roof Slope Length w/o Stepped Joint w/ Fixed Centerline = 440'-0"

SSR requires a minimum of 2” Blanket Insulation or Rigid Board Insulation

Superblock requires 2 Layers of Insulation

ThermaLift requires 2 Layers of Insulation

ThermaLift on Truss Purlins Maximum Roof Pitch = 2:12
Dade and Broward Counties = Special Requirements

Mark Numbers:

S 2 5 1 0 4 2 4 2 G T D

S L L L L L G G O F C C

L = Length = Feet, Feet, Inch, Inch, Eighth

G = Gage

O = Operation

F = Finish

C = Color

Operations:

	Notch Notch
Code	2

Finishes and Colors:

Finish	Color	FCC
KXL	Cool Arctic White	KWA
KXL	Cool Bermuda Green	KBG
KXL	Cool Cobalt Blue	KCO
KXL	Cool Colonial Red	KOR
KXL	Cool Cotton White	KOW
KXL	Cool Dark Bronze	KKB
KXL	Cool Egyptian White	KYW
KXL	Cool Granite Gray	KGG
KXL	Cool Hemlock Green	KGH
KXL	Cool Imperial Blue	KIB
KXL	Cool Leaf Green	KGL
KXL	Cool Sierra Tan	KTS
KXL	Cool Straw Gold	KGD
KXL	Cool Zinc Gray	KGZ
Galvalume	Galvalume	GTD
Special	Special	X01 - X20

Panel Start and End Location

Minimum from the Endwall Rake Work Point = 9 1/8"

Maximum from the Endwall Rake Work Point = 1'-9"

SSR drawings require a Cut dimension that includes the addition 1” field bend dimension.